Avion GWS A10 EP Ducted Fan ARF w/2 EDF55-300H Green 38.1"
This is the GWS A-10 Thunder Bolt Ducted Fan Airplane with two 300 Size Motors. This aircraft is recommended for advanced fliers. Also known as the "Warthog".
FEATURES: Construction: Green colored foam, fully scale appearance Wings: One piece foam, low wing placement Fan Shrouds: Foam 2-piece Canopy: Single plastic Cockpit Features: Included decals for detailing Landing Gear: Pre-bent wire main and steerable nose gear Wheels: Two ultra light style 2" (51mm) main wheels and one 1.5" (38mm) nose wheel Aileron Control: Single servo Hardware: All necessary hardware included Warranty: GWS guarantees this kit free from defects in both materials and workmanship at the date of purchase.
INCLUDES: All foam fuselage,wings,and tail sections, 2 ultra-lite main wheels, 1 ultra-lite nose wheel, main and tailwheel wire, plastic ducted fan units, foam fan shrouds, 2 300 size motors, Y-harness, photo- illustrated instructions, all necessary hardware, decals, and tube of glue
REQUIRES: Speed Control (20A) Battery: 6N400mAH AA NiCd or 6-7N500-730mAh NiMH AAA Charger: Timed or peak Radio: 4 Channel with micro receiver Servos: 3 micro size (1-aileron, 1-elevator, 1-steerable nose gear) Servo Extension 6": One, for ailerons Misc items: Building and field equipment
SPECS: Wingspan: 38.1" (968mm) Wing Area: 216 sq in (13.95 sq dm) Flying Weight: 14.6-16.37oz (414-464g) Wing Loading: 8.46-9.64oz/sq ft (25.8 -29g/sq dm) Length: 34.3" (872mm) Centter of Gravity: 2" - 2.2" (50-57mm) back from the wing's leading edge at the fuselage sides. Control Throws- Low Rate High Rate Ailerons: Up & Down 0.31" (8mm) 0.43" (11mm) Elevator: Up & Down 0.43" (11mm) 0.51" (13mm) Nose steering 0.31" (8mm) 0.39" (10mm)
COMMENTS: GWS does not recommend exceeding 8.4V as this will cause permanent damage to the motors.